You are currently viewing Ps4 controller how to connect

Ps4 controller how to connect

Ps4 controller how to connect,To connect a PlayStation 4 (PS4) controller to your console or another device, follow these steps:

Ps4 controller how to connect:

  1. Connect using a USB cable: a. Grab a USB cable that is compatible with the PS4 controller (usually a Micro-USB cable). b. Connect one end of the USB cable to the micro-USB port on the controller. c. Connect the other end of the USB cable to the USB port on your PS4 console or the device you want to connect the controller to.
  2. Pair wirelessly using Bluetooth: a. Ensure that your device has Bluetooth capabilities and is compatible with the PS4 controller. b. On the PS4 controller, press and hold the PlayStation button (the large button in the middle) and the Share button simultaneously. The light bar on the controller will start flashing, indicating it’s in pairing mode. c. On your device, go to the Bluetooth settings and search for available devices. d. Look for a device named “Wireless Controller” or “DUALSHOCK 4.” Select it to initiate the pairing process. e. Once the pairing is successful, the light bar on the controller will stop flashing and remain lit, indicating a connection.

Note: If you’re connecting the controller to a PC, you might need additional software, such as DS4Windows, to ensure proper functionality.

Remember that the method for connecting a PS4 controller may vary depending on the device you are connecting it to.

Why is my ps4 controller not connecting to ps4?

If your PS4 controller is not connecting to your PS4 console, there are a few potential reasons and troubleshooting steps you can try:

  1. Ensure the controller is charged: Make sure your PS4 controller has enough battery power to establish a connection. Connect it to the console using a USB cable and allow it to charge for a while.
  2. Check the USB cable: Ensure that the USB cable you’re using is not damaged or faulty. Try using a different USB cable to see if the issue is with the cable itself.
  3. Reset the controller: There is a small reset button on the back of the PS4 controller. Use a small object like a paperclip or a pin to press the reset button for a few seconds. Then, connect the controller to the console using a USB cable and try pairing it again.
  4. Re-sync the controller: If the controller was previously connected to another PS4 console, it might not connect to a new console until it’s re-synced. Connect the controller to the console using a USB cable, then press the PlayStation button to sync it.
  5. Restart the console: Sometimes, restarting the PS4 console can resolve connectivity issues. Turn off the console completely, unplug the power cord, wait for a few minutes, then plug it back in and turn it on. Try connecting the controller again.
  6. Check for interference: Ensure that there are no other devices or wireless signals interfering with the Bluetooth connection between the controller and the console. Move any other wireless devices away from the console and controller.
  7. Update the PS4 system software: Make sure your PS4 console is running the latest system software. Connect the console to the internet and go to the settings menu to check for system updates. If an update is available, install it and then try connecting the controller again.
  8. Test with another controller: If possible, try connecting another PS4 controller to your console to determine if the issue is with the controller itself. If the second controller connects successfully, it might indicate a problem with the original controller that needs further troubleshooting or repair.

If none of the above steps resolve the issue, it’s recommended to contact PlayStation support or consult the official PlayStation website for further assistance.

How do I connect my ps4 controller without USB?


To connect a PS4 controller without using a USB cable, you can establish a wireless connection between the controller and the console using Bluetooth. Here’s how you can do it:

  1. Ensure your PS4 console is turned on and in pairing mode.
  2. On the PS4 controller, press and hold the PlayStation button (the large button in the middle) and the Share button simultaneously. The light bar on the controller will start flashing, indicating it’s in pairing mode.
  3. On your PS4 console, go to “Settings” in the main menu.
  4. Select “Devices” and then choose “Bluetooth Devices.”
  5. Your PS4 console will search for available Bluetooth devices. Wait for the console to detect your controller.
  6. Once the controller is detected, it will appear on the screen as “Wireless Controller” or “DUALSHOCK 4.” Select it to initiate the pairing process.
  7. After a few moments, the pairing will be completed, and the light bar on the controller will stop flashing and remain lit, indicating a successful connection.

It’s important to note that not all devices support Bluetooth connectivity with PS4 controllers. Make sure your device has Bluetooth capabilities and is compatible with the PS4 controller. Additionally, some devices might require additional steps or software for proper compatibility.


How to connect PS4 controller to PS4 after connecting to phone?

If you have previously connected your PS4 controller to a phone and now want to connect it back to your PS4 console, you may encounter some difficulties due to the controller still being paired with the phone. Here’s what you can do to connect the PS4 controller back to your PS4:

  1. Disconnect the controller from the phone: a. Turn off Bluetooth on your phone or disable the connection to the PS4 controller. b. If the controller is still connected, go to the Bluetooth settings on your phone, locate the controller, and select “Disconnect” or “Forget Device” to remove the controller from the phone’s paired devices.
  2. Reset the PS4 controller: a. On the back of the PS4 controller, there is a small reset button. Use a small object like a paperclip or a pin to press and hold the reset button for a few seconds. b. After resetting, the controller’s light bar should briefly turn off and then start flashing, indicating it is in pairing mode.
  3. Connect the PS4 controller to the PS4 console: a. Connect the controller to the PS4 console using a USB cable. b. Press the PlayStation button on the controller to power it on. c. The console should automatically detect the controller and establish a connection. Once the connection is established, you can remove the USB cable.

If the above steps don’t work, you may need to try the following additional troubleshooting options:

  1. Restart the PS4 console: Turn off the PS4 console, unplug the power cord, wait for a few minutes, then plug it back in and turn it on. Then try connecting the controller again.
  2. Use the PS4 console’s settings menu: Go to the “Settings” menu on the PS4 console, select “Devices,” and then choose “Bluetooth Devices.” Delete any previous controller pairings from the list and attempt to connect the controller again.

By following these steps, you should be able to connect your PS4 controller back to your PS4 console after using it with your phone.

Can I use my phone as a PS4 controller?


While it’s not possible to directly use your phone as a PlayStation 4 (PS4) controller, there are methods available that allow you to use your phone as a secondary controller or to control certain PS4 functions using specific apps. Here are a few options:

  1. Remote Play App: Sony provides an official app called “PS Remote Play” for iOS and Android devices. This app allows you to remotely connect to your PS4 console and stream games to your phone or tablet. While the app provides virtual buttons on the screen for basic control, it’s not a substitute for a physical PS4 controller. You will still need a DualShock 4 controller or a compatible controller to play games.
  2. Third-Party Apps: Some third-party apps, like “R-Play” for iOS devices, offer similar remote play functionality and virtual control options. These apps often require a DualShock 4 controller for proper gameplay, as they use the phone as a remote display rather than a controller.
  3. Companion Apps: Certain games have companion apps that can be installed on your phone or tablet. These apps may provide additional features, such as a second-screen experience or limited control options, but they are typically designed to complement the main gameplay experience and don’t replace the functionality of a physical controller.

While these options offer remote control or additional features, they don’t provide the same level of control and precision as a physical PS4 controller. For the best gaming experience on the PS4 console, it’s recommended to use a DualShock 4 controller or a compatible controller.

How to charge ps4 controller?

To charge a PlayStation 4 (PS4) controller, follow these steps:

  1. Ensure you have a Micro-USB cable: The PS4 controller uses a Micro-USB port for charging. Make sure you have a compatible Micro-USB cable available. If you don’t have one, you can purchase it separately.
  2. Connect the USB cable to the controller: Take one end of the Micro-USB cable and insert it into the Micro-USB port located at the top of the PS4 controller.
  3. Connect the USB cable to a power source: Take the other end of the Micro-USB cable and connect it to a power source. You have a few options:
    • Connect it to the USB port on your PS4 console: One of the easiest ways to charge your PS4 controller is by connecting it to the USB port on your PS4 console. The USB ports are typically located on the front or back of the console.
    • Connect it to a USB wall charger: If you have a USB wall charger, you can connect the Micro-USB cable to the charger and plug it into a wall outlet.
    • Connect it to a computer or other USB-enabled device: You can also connect the Micro-USB cable to a computer or any other device with a USB port. Make sure the device is powered on.
  4. Charging indicator: Once the Micro-USB cable is connected, the light bar on the PS4 controller will start flashing or pulsing to indicate that it is charging. The light bar will continue flashing until the controller is fully charged.
  5. Wait for the controller to charge: Leave the controller connected to the power source and let it charge. The time it takes to fully charge the controller can vary, but it usually takes around 1 to 2 hours.
  6. Check the charging status: To check the charging status of the PS4 controller, you can briefly press the PlayStation button. The light bar will briefly illuminate, indicating the current charge level. A solid light indicates a full charge, while a pulsing or flashing light indicates the remaining battery life.

Remember to disconnect the Micro-USB cable from the controller and the power source once it is fully charged.

More story in Hindi to read:

Funny story in Hindi

Bed time stories in Hindi

Moral stories in Hindi for class

Panchtantra ki kahaniyan

Sad story in Hindi

Check out our daily hindi news:

Breaking News

Entertainment News

Cricket News

Leave a Reply